*LAN/WAN connectivity requires the purchase of the LAN/WAN device, Model: SEG-1. Description The e style keypad uses hardened backlit keys to ensure long-term durability and high-quality performance. Requirements Section 3: Specifications Section 4: Mounting Section 5: Wiring 5.1 Wire Harness Configuration 5.2 Wiring the 232e Keypad to a Maglock (Fail-Safe) 5. The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position, and enhanced system functionality when used with Hub Manager Professional software. The proximity reader is capable of being mounted up to a maximum of 10 feet away from the prox.pad plus. IEI 232e StandaloneTM Keypad Installation/ Programming Manual Contents Section 1: Features and Product Description 1.1 Features 1.2 Product Description Section 2: U.L. Prox.pad plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad. The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces. By utilizing the proximity reader and keypad together, a higher level of security is achieved by requiring both to grant access. The software can communicate to the prox.pad plus either through a 485 connection, or on a LAN/WAN using the SEG-1 TCP/IP communication device. Features and Product Description 1. The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality. This output is not available if you are using the IEI 250 Printer Interface. 2000e & 2000eM Keypad Installation & Programming Wiring a Maglock (Fail-Safe) Wiring the REX and Door Position Switch Connect the red wire (V+) to the blue wire (common), and Connect the brown wire (REX Input) to the normally open then connect them to the positive on the power supply. You can use this to turn on lights, CCTV camera, or notify a guard. For new installations it is required that AccessBase. DoorGard Command and Control keypads can be programmed to energize a voltage output whenever a key is touched. AccessBase V1.54 is a version upgrade for the V1.52 release. e3-telephone-entry-toolbox.zip (35 MB) AccessBase for Access Control Systems AM/II, AE-1, and AE-2. The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position, and enhanced system functionality when used with Hub Manager® Professional software. e3-access-toolbox.zip (142 MB) e3 Telephone Entry Toolbox. Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |